A Low-Cost Open-Source 3-D-Printed Three-Finger Gripper Platform for Research and Educational Purposes

Simple item page
dc.contributor.authorTelegenov, Kuat
dc.contributor.authorTlegenov, Yedige
dc.contributor.authorShintemirov, Almas
dc.date.accessioned2017-11-07T09:49:48Z
dc.date.available2017-11-07T09:49:48Z
dc.date.issued2015-06-02
dc.description.abstractRobotics research and education have gained significant attention in recent years due to increased development and commercial deployment of industrial and service robots. A majority of researchers working on robot grasping and object manipulation tend to utilize commercially available robot-manipulators equipped with various end effectors for experimental studies. However, commercially available robotic grippers are often expensive and are not easy to modify for specific purposes. To extend the choice of robotic end effectors freely available to researchers and educators, we present an open-source lowcost three-finger robotic gripper platform for research and educational purposes. The 3-D design model of the gripper is presented and manufactured with a minimal number of 3-D-printed components and an off-the-shelf servo actuator. An underactuated finger and gear train mechanism, with an overall gripper assembly design, are described in detail, followed by illustrations and a discussion of the gripper grasping performance and possible gripper platform modifications. The presented open-source gripper platform computer-aided design model is released for downloading on the authors research lab website(www.alaris.kz) and can be utilized by robotics researchers and educators as a design platform to build their own robotic end effector solutions for research and educational purposes.ru_RU
dc.identifier.citationTelegenov Kuat et al.(>2), 2015(June 2), A Low-Cost Open-Source 3-D-Printed Three-Finger Gripper Platform for Research and Educational Purposes, IEEE Access, vol.3ru_RU
dc.identifier.issn2169-3536
dc.identifier.uriDOI:10.1109/ACCESS.2015.2433937
dc.identifier.urihttp://nur.nu.edu.kz/handle/123456789/2745
dc.language.isoenru_RU
dc.publisherIEEE Accessru_RU
dc.rightsOpen Access - the content is available to the general publicru_RU
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectopen-source robotic gripperru_RU
dc.subjectgear train mechanismru_RU
dc.subject3D printingru_RU
dc.subjectunderactuationru_RU
dc.subjectadaptive graspingru_RU
dc.titleA Low-Cost Open-Source 3-D-Printed Three-Finger Gripper Platform for Research and Educational Purposesru_RU
dc.typeArticleru_RU

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
A Low-Cost Open-Source 3-D-Printed.pdf
Size:
41.8 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
6 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Articles