Electrospun 3D structured carbon current collector for Li/S batteries

Simple item page
dc.contributor.authorYerkinbekova, Yerkezhan
dc.contributor.authorKalybekkyzy, Sandugash
dc.contributor.authorMentbayeva, Almagul
dc.contributor.authorBaikalov, Nurzhan
dc.contributor.authorKahraman, Memet Vezir
dc.contributor.authorBakenov, Zhumabay
dc.date.accessioned2020-10-26T04:37:12Z
dc.date.available2020-10-26T04:37:12Z
dc.date.issued2020-08
dc.description.abstractLight weight carbon nanofibers (CNF) fabricated by a simple electrospinning method and used as a 3D structured current collector for a sulfur cathode. Along with a light weight, this 3D current collector allowed us to accommodate a higher amount of sulfur composite, which led to a remarkable increase of the electrode capacity from 200 to 500 mAh g-1 of the electrode including the mass of the current collector. Varying the electrospinning solution concentration enabled obtaining carbonized nanofibers of uniform structure and controllable diameter from several hundred nanometers to several micrometers. The electrochemical performance of the cathode deposited on carbonized PAN nanofibers at 800 ◦C was investigated. An initial specific capacity of 1620 mAh g−1 was achieved with a carbonized PAN nanofiber (cPAN) current collector. It exhibited stable cycling over 100 cycles maintaining a reversible capacity of 1104 mAh g−1 at the 100th cycle, while the same composite on the Al foil delivered only 872 mAh g−1. At the same time, 3D structured CNFs with a highly developed surface have a very low areal density of 0.85 mg cm−2 (thickness of ~25 μm), which is lower for almost ten times than the commercial Al current collector with the same thickness (7.33 mg cm−2 ).en_US
dc.identifier.citationYerkinbekova, Y., Kalybekkyzy, S., Mentbayeva, A., Baikalov, N., Kahraman, M.V. & Bakenov, Z. (2020). Electrospun 3D structured carbon current collector for Li/S batteries [Abstract]. The 8th International Conference on Nanomaterials and Advanced Energy Storage Systems; Nazarbayev University; National Laboratory Astana; Institute of Batteries.en_US
dc.identifier.urihttp://nur.nu.edu.kz/handle/123456789/5039
dc.language.isoenen_US
dc.publisherThe 8th International Conference on Nanomaterials and Advanced Energy Storage Systems; Nazarbayev University; National Laboratory Astana; Institute of Batteriesen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectcarbon nanofibersen_US
dc.subjectCNFen_US
dc.subjectResearch Subject Categories::TECHNOLOGYen_US
dc.subjectcarbonized PAN nanofiberen_US
dc.subjectcPANen_US
dc.titleElectrospun 3D structured carbon current collector for Li/S batteriesen_US
dc.typeAbstracten_US
workflow.import.sourcescience

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Abstract book INESS 2020_Part41.pdf
Size:
381.27 KB
Format:
Adobe Portable Document Format
Description:
Abstract
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
6.28 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Abstracts