dc.contributor.author | Wang, Shuo | |
dc.contributor.author | Cong, Fanglin | |
dc.contributor.author | Araby, Sherif | |
dc.contributor.author | Kaytbay, Saleh | |
dc.contributor.author | Cai, Rui | |
dc.contributor.author | Cui, Xu | |
dc.contributor.author | Meng, Qingshi | |
dc.date.accessioned | 2023-03-28T05:21:08Z | |
dc.date.available | 2023-03-28T05:21:08Z | |
dc.date.issued | 2021 | |
dc.identifier.citation | Wang, S., Cong, F., Araby, S., Kaytbay, S., Cai, R., Cui, X., & Meng, Q. (2021). Effect of graphene on the mechanical and electrochemical properties of GLARE. Journal of Adhesion Science and Technology, 36(20), 2159–2175. https://doi.org/10.1080/01694243.2021.2003159 | en_US |
dc.identifier.uri | http://nur.nu.edu.kz/handle/123456789/6981 | |
dc.description.abstract | This study explores the effect of different graphene contents on the mechanical behaviour, tensile and flexural properties, and the electrochemical performance of cross-layered glass-reinforced aluminium (GLARE) laminates. Results show that the mechanical properties of GLARE with different graphene contents are similar but not identical. The mass fraction of graphene (0 wt.%–1.0 wt.%) is calculated from the total mass of adhesive. As the graphene content increases (0 wt.%–1.0 wt.%), flexural strength peaks in the presence of 0.5 wt.% graphene, but tensile strength continues to increase. When the graphene mass ratio is 1.0 wt.%, the maximum tensile strength is 245.45 MPa. When the graphene mass ratio is 0.5 wt.%, interlaminar shear strength and flexural strength are 19.06 and 260.22 MPa, respectively, which correspond to different span–thickness ratios of 8/1 and 32/1. This graphene mass ratio indicates the best three-point flexural performance of graphene-reinforced GLARE. This study further explains the enhancement mechanism through fracture surface observation. Graphene with a mass ratio of 0.5 wt.% maximises the flexural strength whilst maintaining a strong GLARE electrochemical performance. At scanning speeds of 40, 80, and 100 mV/s, the specific capacitance values are 1.76, 2.47, and 2.88 F/g, respectively. According to quantum tunnelling theory, graphene can form a conductive network when it is dispersed in a resin matrix. This theory reveals the reason why 0.5 wt.% graphene platelet-modified GLARE has good electrochemical properties. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Journal of Adhesion Science and Technology | en_US |
dc.rights | Attribution-NonCommercial-ShareAlike 3.0 United States | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-sa/3.0/us/ | * |
dc.subject | Type of access: Open Access | en_US |
dc.subject | GLARE | en_US |
dc.subject | mechanical properties | en_US |
dc.subject | electrochemical performance | en_US |
dc.subject | graphene | en_US |
dc.title | EFFECT OF GRAPHENE ON THE MECHANICAL AND ELECTROCHEMICAL PROPERTIES OF GLARE | en_US |
dc.type | Article | en_US |
workflow.import.source | science |
The following license files are associated with this item: