NUR Home
→
Browsing by Title

Browsing by Title

Now showing items 1205-1224 of 6074

Design of a large scale flow-meter test and calibration facility

Corrales-Barallobre, C.; Martínez-Huen, R.; Alvarez, Luis; Polanco, G.; Rojas-Solorzano, L. (FEDSM2000 FORUM ON FLUID MEASURENMENT AND INTRUMENTATION BOSTON, MASSACHUSETTS, ON JUNE 11-15, 2000, 2000-06-11)

The design and set up of a large-scale flowmeter calibration and test facility is presented. The facility was designed to handle flowmeters with diameters between 6” and 14”, flow rates up to 0.3 m3/s and to give results ...
Design of a multi-storey student resident building in Astana, Kazakhstan

Korshibek, Adilet; Miribayeva, Gulnara; Talasbayeva, Tamila; Tleuken, Aidana; Uteulina, Guldana (Nazarbayev University School of Engineering and Digital Sciences, 2018)
DESIGN OF AN ATTITUDE CONTROL SYSTEM FOR A CUBESAT NANOSATELLITE

Murzabulatov, Alimzhan (School of Engineering and Digital Sciences, 2023)

The proposed research was carried out to design an appropriate non-linear controller for a non-linear time-variant model of a CubeSat nanosatellite. It is intended to experiment with a controller such as model predictive ...
Design of Aptamer-Functionalized Substrates: Towards Breast Cancer Stem Cell Isolation and Detection

Bekmurzayeva, Aliya (Nazarbayev University School of Engineering and Digital Sciences, 2020-09-25)

Cancer relapse and metastasis remain one of the main problems in treatment of breast cancer (BC). A small subset from bulk tumor cells, called breast cancer stem cells (BCSCs), is found to be responsible for cancer initiation, ...
DESIGN OF A SHARED CONTROL INTERFACE FOR A POWERED WHEELCHAIR

Malik, Asset (School of Engineering and Digital Sciences, 2023)

Powered wheelchairs significantly improve mobility of individuals with physical limitations, but their high cost and challenges associated with traditional joystick controls often limit their accessibility and ease of ...
DESIGN OF A SIMULATION FRAMEWORK FOR POMDP BASED AUTONOMOUS OBJECT GRASPING WITH A MOBILE ROBOT MANIPULATOR

Dabarov, Aldiyar (Nazarbayev University School of Engineering and Digital Sciences, 2022-05)

The ALARIS laboratory is developing a mobile manipulator for POMDP-based object grasping tasks. It is necessary to develop a simulation environment for testing purposes. However, the task can be repeated using different ...
DESIGN OF CMOS-MEMRISTOR CIRCUIT OF LSTM ARCHITECTUR

Smagulova, Kamilya (Nazarbayev University School of Engineering and Digital Sciences, 2021-03)

The growing amount of data, the dawn of Moore's law, and the need for machines with human intelligence dictated several new concepts in computing and chip design. Existing physical limitations of Complementary Metal-Oxide ...
DESIGN OF GERMANIUM P-TYPE POINT CONTACT DETECTOR ASIC PREAMPLIFIER

Yessengaliyev, Azamat (School of Engineering and Digital Sciences, 2023)

This Master's thesis investigates the preamplifier designs for High Purity Germanium (HPGe) detectors and compares their performance characteristics. The topic is important in the fields of nuclear physics, materials ...
Design of load-and-misalignment-insensitive gearing for aerospace, automotive and naval applications.

Akiltayev, Ali; Beysekenov, Ilyas (Nazarbayev University School of Engineering and Digital Sciences, 2017-04)

The operation of gears is usually accompanied with noise and vibrations that are caused by various sources. Two of the major ones are load and misalignment, which induce high magnitudes of stress on gear teeth. Hence, the ...
DESIGN OF LOW-SILICA ZEOLITES BASED ON NATURAL HALLOYSITE NANOTUBES

Rubtsova, Maria; Glotov, Aleksandr; Vinokurov, Vladimir (National Laboratory Astana, 2022-08)

In this work, application of a natural halloysite nanoclay as a source of silicon and aluminum atoms for the synthesis of various low-silica zeolites has been proposed.
Design of multi-purpose sport complex and residential block at Nazarbayev University

Iliyas, Nursultan; Orynbassar, Dauletkhan; Kabiden, Kuanysh; Kydyrmoldina, Bakytzhan; Urazalina, Elmira (Nazarbayev University School of Engineering and Digital Sciences, 2018)
DESIGN OF MULTI-STORY ACADEMIC BUILDING AT NAZARBAYEV UNIVERSITY, ASTANA, KAZAKHSTAN

Agibayeva, Aidana; Aldonggarova, Ardana; Kenzhebek, Aidar; Kulzhabek, Zhanbolat; Suleimen, Alisher (Nazarbayev University School of Engineering and Digital Sciences, 2017)

Nazarbayev University has experienced significant growth in the past few years and it is projected to increase in the future. Hence, the necessity of multi-story academic building at Nazarbayev University is high. This ...
`DESIGN OF POLYMERIC NANOCOMPOSITE MEMBRANE FOR SEPARATION PROCESSES

Ospanova, Aigerim (School of Engineering and Digital Sciences, 2023)

Sulfur-containing compounds are well-known pollutants in fuels. Because of concerns about catalyst poisoning and environmental issues, it is crucial to remove these substances before commercial usage. Deep desulfurization ...
DESIGN OF RECONFIGURABLE CIRCUITS IN SILICON USING MICRO-RING RESONATORS

Nurgali, Assylkhan (Nazarbayev University School of Engineering and Digital Sciences, 2022-05)

A newly developed optical reconfigurable circuit with binary decoders and memory device has been designed. The reconfigurable circuits change their configurations with control signals. There have been many optical ...
Design of small-scale tilt-rotor unmanned aerial vehicle

Kassymov, A.; Orazbayev, D.; Akhatova, A.; Adair, D.; Ali, Md. H. (Nazarbayev University, 2014)

Unmanned Aerial Vehicle (UAV) is the aircraft without a human pilot aboard. UAVs are subcategorized as RC Models, which are controlled by a pilot via transmitter-receiver system, and Drones, which are fully autonomous. ...
Design of the distribution manifold for a large-scale flowmeter calibration facility

Corrales-Barallobre, C.; Martínez-Huen, R.; Alvarez, Luis; Polanco, G.; Rojas-Solorzano, L. (FEDSM2000 FORUM ON FLUID MEASURENMENT AND INSTRUMENTATION BOSTON, MASSACHUSETTS, ON JUNE 11-15, 2000, 2000-06-11)

The design and test of the distribution manifold for a large-scale flowmeter calibration facility is presented. The design was intended to have an air-free flow operation and a free-surface flow-like towards the downstream ...
Design of velocity measurement system to generate warm dense matter of insulator by flyer impact

Tamura, Fumihiro; Takakura, Naoto; Nakayama, Yusuke; Kashine, Kenji; Tokuchi, Akira; Kikuchi, Takashi; Takahashi, Kazumasa; Sasaki, Toru; Harada, Nobuhiro; Jiang, Weihua; Fujioka, Shinsuke; Sano, Takayoshi (21st International Symposium on Heavy Ion Inertial Fusion. Autonomous Organization of Education “Nazarbayev University”, 2016-07-18)

A table-top pulsed power generator with isochoric heating using sapphire hollow capillary was proposed and used to generate the extreme state of matter such as warm dense matter (WDM) [1]. However, to generate WDM of ...
Design of velocity measurement system to generate warm dense matter of insulator by flyer impact

Tamura, Fumihiro; Takakura, Naoto; Nakayama, Yusuke; Kashine, Kenji; Tokuchi, Akira; Kikuchi, Takashi; Takahashi, Kazumasa; Sasaki, Toru; Harada, Nobuhiro; Jiang, Weihua; Fujioka, Shinsuke; Sano, Takayoshi (21st International Symposium on Heavy Ion Inertial Fusion. Autonomous Organization of Education “Nazarbayev University”, 2016-07-18)
DESIGN OPTIMIZATION OF A KNEE JOINT FOR THE GAIT REHABILITATION EXOSKELETON

Dauletbayev, Shyngys (School of Engineering and Digital Sciences, 2023)

This work is done towards the enhancement of the knee joint mechanism to achieve best alignment possible between exoskeleton and human knee joint motion. Various studies have concluded that the misalignment at the knee ...
Design Optimization of an Oil-Air Catch Can Separation System

Abilgaziyev, Anuar; Nogerbek, Nurbol; Rojas-Solorzano, L. (Journal of Transportation Technologies, 2015-10-27)

The Positive Crankcase Ventilation (PCV) system in a car engine is designed to lower the pressure in the crankcase, which otherwise could lead to oil leaks and seal damage. The rotation of crankshaft in the crankcase causes ...